Operation and Maintenance 8 Points for Broadyea Instant Noodles Production Line
Installing and maintaining instant noodle production lines is an essential part for manufacturers. In this regard, Broadyea Instant Noodle Production Lines could provide lots of advantages, ranging from convenience of operation to high production output. Therefore, how to effectively keep the production line operation and maintenance is critical. Here are the 8 key points that you should pay attention to.
Firstly, during the installation process, the operation personnel should check whether the components of the installation meet the technical requirements and the production line is in line with safety regulations. After that, it is also necessary to adjust the rotating pieces to see if everything is in the right place. And also the machinery supplier will provide the installation operation manual for installing the machine, the operation personnel should be followed the step to install the noodle line.
Secondly, it is necessary to inspect the wear and tear of the machine before starting up, including checking whether the wiring connections are intact, and whether the control cabinet current trips are normal. This is to make sure the production line could start running safely after booting up.
Thirdly, it is essential to daily maintain the production line and unfasten the wire net case of the equipment periodically. Moreover, it is necessary to conduct daily inspection to see if there are any abrasion and rust which can damage the machine, and if there is any lubricating oil leaking. If necessary, personnel should repair the abrasion and add more lubricating oil. And clean the machine by water or air comperssor, the detail should be follow the noodle line operation manual.
Fourthly, personnel should inspect the lubrication parts and the air pipes, cleaning up the dust on the surface. Also, checking the bolts for loose or dropping off and installing them back again should also become a routine.
Fifthly, personnel should clean up the cooling fan and check out the motor at least once a month to optimize its performance.
Sixthly, it is necessary to conduct a quarterly inspection, checking if the bearings are damaged, and if the lines of the left and right side of the base plate are deformed. Also, personnel should check out if there are any loose wires, or short-circuit that might cause the malfunction of the machine.
Seventhly, it is essential to take out the dust accumulated in the storage box quarterly, to make sure it is clean and tidy.
Finally, personnel should add lubricating oil and adjust the equipment every six months, which is for the sake of maintaining and optimizing the performance of the equipment.
To sum up, these 8 key points should be seriously paid attention to when it comes to installing, running and maintaining. Broadyea Instant Noodle Production Lines, which can ensure the equipment of high quality and accuracy, and maintain a high production output. If you want to know more about instant noodle production line information, please just feel free to contact us. We will share more instant noodle industrial message.